0 out of 5

    ISONEM ANTI SOUND PAINT, the acoustic paint which is used to stop and reduce sounds, is designed to absorb and isolate the sound in the best possible way. According to the measurement and analysis carried out in conformity with the TS 140-4 Standard; It has been certified in Türkak approved accrediting laboratories, that the applied paint reduces and absorbs the sound level 2.51 dB as regards to 1000Hz, when applied as a 1 mm thick layer and it reduces and absorbs the sound level 4.85 dB as regards to 1000Hz, when applied as a 2mm thick layer, in the 1/3 octave frequency band.


    0 out of 5

    Transparent Floor Insulation “Non Film Formation”

    This product applies insulation without the formation of the film on the surface applied, with full impregnation on the floors or the walls, ensuring full protection, it breathes, is not affected from the UV lights or the sun rays, and is inflammable. It dries up within one hour after the application.

  • ISONEM BE 89 2K

    0 out of 5

    Two Component Bitumen Based Liquid Membrane Waterproofing

    ISONEM BE 89 2K is a two component bitumen + cement-based, flexible and quick-drying water-based liquid membrane. Its elasticity and strength are reinforced with various admixtures and polymers. After evaporation of the water within, by sticking firmly to the applied surface, it creates an elastic coating resistant to water and humidity.

  • ISONEM BE 99

    0 out of 5

    Elastic, Acrylic Emulsion Based Exterior Paint

    ISONEM BE 99 is an exterior paint that forms an elastic and waterproof layer on the surfaces applied after drying up. It offers a decorative coating, it is acrylic emulsion based. It does not contain solvents and has an elasticity of 300%, it can be applied on dry or slightly humid surfaces. It is highly resistant against UV radiation and climatic conditions.


    0 out of 5

    Super Adhesive

    This is a liquid product, which is added into mortar or applied onto the surface for the applications such as ceramic works or the insulations based on concrete, plaster, alum, cement, provides the mortar with the adhesion, flexibility and the feature increasing the adherence. It offers an excellent adherence and retaining feature for the old material or the new one to be applied on by forming a super adhesive layer. In respect of concrete, plater, alum, applications, it prevents the formation of cold joint filler.


    0 out of 5

    ISONEM DS is a one component, transparent penetrating non-yellowing protective sealer. The product forms a transparent, elastic and uniform layer after drying. It is not affected from UV rays and external climatic conditions. ISONEM DS is used as a penetrating dustproof sealer for areas such as warehouses, storage facilites, car parks, garrages, light industrial buildings etc. It is resistant against wear and tear and is not affected from human or vehicle traffic. It is also resistant against various chemical substances.


    0 out of 5

    Two-Component Solvent Free Epoxy Resin Based Primer

    ISONEM EP is a two-component solvent free epoxy resin based primer with high chemical resistance and approved for use in contact with potable (drinking) water.


    0 out of 5

    Solvent Free Epoxy Based Coating

    ISONEM FLOOR is a solvent free epoxy based, two component, coating material that when cured provides a tough high gloss floor with high chemical and physical resistance. It can be applied in thick layers to protect the metal and concrete surfaces against the chemical and physical outside impacts.
    USING AREAS: A long lasting coat is used to provide durable floors for a wide range of industrial and commercial applications. •Industrial plants, factories, refinery plants and particularly •Drug and food production fields due to solvent-free characteristics, •Acid production sites, •Chemicals factories, Warehousing •Laboratories, •Automotive and aerospace industries •Purification facilities, •Water tanks, •Metal and concrete floor and walls


    0 out of 5

    Tennis Court Paint

    ISONEM FLOOR PAINT is a single component, water and acrylic-based coating material. USAGE AREAS: To obtain a dust free decorative surface on concrete and cement surfaces indoors and outdoors, ISONEM FLOOR PAINT is used in following locations: (without continuous contact with water): •Garages and parking lots with light traffic •Walkways amongst residences, pavements, locations of traffic signs etc. •Tennis courts, playgrounds and recreational grounds

  • ISONEM M 03

    0 out of 5

    Polymer Modified Repair Mortar

    ISONEM M 03 is a cementitious, polymer modified, fiber reinforced, one component repair mortar for horizontal, vertical and overhead applications. ISONEM 03 can also be used in combination with ISONEM EP epoxy bonding agent for trafficed repairs. USES: •Fair faced concrete repairs •Repairs of wall and ceiling •Preparation of substrates before tile applications.

  • ISONEM M 35 – 2K

    0 out of 5

    Cement + Acrylic Based Elastic Waterproof Coating For Internal And External Use

    ISONEM M 35 – 2K is a blend of cements, aggregate and acrylic polymer modifying agents. When mixed to a slurry consistency with the emulsion ISONEM M 35 – 2K Liquid, it can be easily applied by brush or spray equipment. It cures to give an elastomeric flexible waterproofing membrane.


    0 out of 5

    MS Polymer

    ISONEM MS POLYMERS is a one part, solvent-free, pure acrylic-based special waterproofing polymer produced by the latest technology. It is ready to use, UV resistant, bright, hard elastic and walkable. It is not affected by pedestrian and vehicle traffic and chemicals. It is used as an insulation material on terraces, roofs, balconies and wet rooms, industrial floors, concrete, alum, plaster, wood surfaces, spray polyurethane applied surfaces, sidings and foundation walls. As it dries too fast, it is easy to work and quick. Very economical due to its low consumption.